論文
Effects of primary C1-C6 linear alcohol addition and sonochemically decomposed products on multi-bubble sonoluminescence
K. Shiba, Y. Takemura, Y. Mizukoshi, and K. Yamamoto
Japanese Journal of Applied Physics, in press.
水加ヒドラジン燃料電池システムで副生するアンモニアの水中プラズマ法による選択的分解処理
井関芳和、岩崎良平、坂本友和、山口 進、水越克彰
化学工学論文集、印刷中
Effects of Sonication on Photocatalytic Reforming of Aqueous Glycerol Solution
Y. Mizukoshi
Ultrasonics Sonochemistry, 51(2019) 182-185.
https://doi.org/10.1016/j.ultsonch.2018.10.027 (published online October 22, 2018).
Effects of Alcohol Addition on Sonoluminescence Intensity Decay
K. Shiba, Y. Takemura, Y. Mizukoshi, and K. Yamamoto
Acoustical Science and Technology, 40 (2019) 49-51.
Effects of intramedullary nails composed of a new β-type Ti-Nb-Sn alloy with low Young’s modulus on fracture healing in mouse tibiae
H. Fujisawa, Y. Mori, A. Kogure, H. Tanaka, M. Kamimura, N. Masahashi, S. Hanada, and E. Itoi
Journal of Biomedical Materials Research: Part B - Applied Biomaterials, in press.
Deactivation of Algae by Plasma Generated in Seawater Flow
Y. Mizukoshi, Y. Matsuda, S. Yamanaka, T. Ikeno, K. Haraguchi, N. Goda, Y. Nishimura, and K. Yamamoto
Chemistry Letters, 47 (2018) 116-118.
Advance Publication on the web November 11, 2017
https://doi.org/10.1246/cl.170903
Comparison of reductive nanoparticle preparation by plasma and by ultrasound irradiation in aqueous solution
Y. Mizukoshi, F. Hori, and K. Okitsu
Japanese Journal of Applied Physics, 57(2018) 0102A5 (published online November 20, 2017).
(OPEN ACCESS) https://doi.org/10.7567/JJAP.57.0102A5
Plasma generation in aqueous solution containing volatile solutes
Y. Mizukoshi, S. Hatanaka, K. Okitsu, Y. Iseki, R. Iwasaki, T. Sakamoto, S. Yamaguchi, H. Tanaka, and S. Tanabe
Japanese Journal of Applied Physics,57 (2018) 0102B7 (published online November 2, 2017).
(OPEN ACCESS)
https://doi.org/10.7567/JJAP.57.0102B7
Study of bioactivity on a TiNbSn alloy surface
N. Masahashi, Y. Mori, H. Tanaka, A. Kogure, H. Inoue, K. Ohmura, Y. Kodama , M. Nishijima, E. Itoi, and S. Hanada
Thin Solid Films, 639 (2017) 22-28.
Atomic and nanoscale imaging of a cellulose nanofiber and Pd nanoparticle composite using lower-voltage high-resolution TEM
M. Ohwada, Y. Mizukoshi, T. Shimokawa, N. Hayashi , Y. Hayasaka, and T.J. Konno
Microscopy, 66 (2017) 348-355.
https://doi.org/10.1093/jmicro/dfx021
One-pot preparation of Pd nanoparticles supported on graphene from Pd electrodes by discharge plasma in graphene suspension and its catalytic activity for hydrogenation of nitrobenzene
A. Tokai, K. Okitsu, F. Hori, Y. Mizukoshi, Y. Nishimura, S. Seino, and A. Iwase
Materials Letters, 199 (2017) 24-27.
http://dx.doi.org/10.1016/j.matlet.2017.04.018
水中プラズマの衛生分野、農業分野への応用
水越克彰、玉井鉄宗、清野智史、堀部博志、西村芳実
表面技術、Vol. 67, No. 6, 302-305.
One-step synthesis of graphene-Pt nanocomposites by gamma-ray irradiation
A. Tokai, K. Okitsu, F. Hori, Y. Mizukoshi and A. Iwase
Radiation Physics and Chemistry, 123 (2016) 68-72.
DOI: 10.1016/j.radphyschem.2016.02.019
Photo-induced properties of anodic oxide on Ti-Pd alloy prepared in an acetic acid electrolyte
N. Masahashi, Y. Mizukoshi, H. Inoue, K. Ohmura, and T. Moroishi
Journal of Alloys and Compounds, 669 (2016) 91-100.
DOI: 10.1016/j.jallcom.2016.01.220
Bone-like apatite formation and biocompatibility of a low Young’s modulus Ti-Nb-Sn Alloy treated with anodic oxidation and hot water
H. Tanaka, Y. Mori, A. Noro, A. Kogure, M. Kamimura, N. Yamada, S. Hanada, N. Masahashi, and E. Itoi
PLos One (2016) Feb25;11(2): e0150081.
Electroforming of oxide-nanoparticle-reinforced copper-matrix composite
S. Semboshi, Y. Sakamoto, H. Inoue, A. Iwase and N. Masahashi
J. Mater. Res., 30(2015)521-527.
DOI:10.1557/jmr.2014.401
Supporting of pristine TiO2 with noble metals to enhance the oxidation and mineralization of paracetamol by sonolysis and sonophotolysis
A. Ziylan Yavas, Y. Mizukoshi, Y. Maeda and N. H. Ince
Applied Catalysis B: Environmental, 172-173 (2015) 7-17.
DOI:10.1016/j.apcatb.2015.02.012
Nitrogen Fixation in an Aqueous Solution by a Novel Flow Plasma System
Y. Mizukoshi, R. Katagiri, H. Horibe, S. Hatanaka, M. Asano and Y. Nishimura
Chemistry Letters, 44 (4) (2015) 495-496.
DOI: 10.1246/cl.141174
Fabrication of Antibacterial Photocatalytic Titanium Foil by Anodic Oxidation
Y. Miura, Y. Fujii, Y. Mizukoshi, Y. Miyao and N. Masahashi
Chemistry Letters, 44 (3) (2015) 277-278.
DOI:10.1246/cl.140976
Catalytic activities of sonochemically prepared Au-core/Pdshellstructured bimetallic nanoparticles immobilized onTiO2 and its dependence on Pd-shell thickness
Y. Mizukoshi, K. Sato, J. Kugai, T.A. Yamamoto, T.J. Konno and N. Masahashi
Journal of Experimental Nanoscience, 10 (2015) 235-247.
DOI:10.1080/17458080.2013.824617
Local structure of vanadium in Ti-6Al-4V alloy anodized in acetic acid aqueous solution and its contribution to visible light response of photocatalysis
Y. Mizukoshi, T. Okajima and N. Masahashi
Applied Catalysis B: Environmental, 162 (2015) 180-186.
DOI : 10.1016/j.apcatb.2014.06.050
Electroforming of oxide-nanoparticle-reinforced copper-matrix composite
S. Semboshi, Y. Sakamoto, H. Inoue, A. Iwase, and N. Masahashi
Journal of Materials Research, 30 (2015) 521-527 .
Fabrication of a high-performance hip prosthetic stem using βTi-33.6Nb-4Sn
S. Hanada, N. Masahashi and T.K. Jung
Jounal of Mechanical Behavior and Biomedical Materials, 30(2014)140-149
DOI : 10.1016/j.jmbbm.2013.11.002
In-vitro biomechanical evaluation of stress shielding and initial stability of a low-modulus hip stem made of beta type Ti-33.6Nb-4Sn alloy
G. Yamako, E. Chosa, K. Totoribe, S. Hanada, N. Masahashi, N. Yamada and E.Itoi
Medical Engineeringg and Physics 36(2014)1665-1671.
DOI:10.1016/j.medengphy.2014.09.002
Fabrication of a TiO2 photocatalyst by anodic oxidation of Ti in an acetic acid electrolyte
Y. Mizukoshi and N.Masahashi
Surface Coating Technology, 240 (2014) 226-232.
DOI : 10.1016/j.surfcoat.2013.12.030
Formation Mechanism of Noble Metal Nanoparticles in Aqueous Solution by Solution Plasma
Y. Mizukoshi, N. Masahashi and S. Tanabe
Science of Advanced Materials, 6 (2014) 1569-1572.
DOI : 10.1166/sam.2014.1829
Effect of swaging on Young's modulus of βTi-33.6Nb-4Sn alloy
S. Hanada, N. Masahashi, T.-K. Jung, M. Miyake, Y. S. Sato and H. Kokawa
Jounal of Mechanical Behavior and Biomedical Materials, 32(2014) 310-320.
DOI 10.1016/j.jmbbm.2013.10.027
Effect of stress-induced α″ martensite on Young's modulus of β Ti33.6Nb4Sn alloy
S. Hanada, N. Masahash and T.-K. Jung
Materials Science and Engineering A, 588(2013)403-410.
DOI:10.1016/j.msea.2013.09.053
チタン合金の陽極酸化による光触媒材料の開発
水越克彰、正橋直哉
スマートプロセス学会誌、2 (2013) 320-325.
Structural and characteristic variation of anodic oxide on pure Ti with anodization duration
Y. Mizukoshi, N. Ohtsu and N. Masahashi
Applied Surface Science, 283 (2013) 1018-1023.
DOI:10.1016/j.apsusc.2013.07.062
Solid-state bonding of alloy-designed Cu-Zn brass and steel associated with phase transformation by spark plasma sintering
N.Masahashi, S.Semboshi, K.Watanabe, Y.Higuchi, H.Yamagata and Y.Ishizaki
Journal of Materials Science, 48(2013)5801-5809.
DOI:10.1007/s10853-013-7372-z
Effect of CeO2 support properties on structure of Pt-Cu nanoparticles synthesized by electron beam irradiation method for preferential CO oxidation
J. Kugai, T. Moriya, S. Seino, T. Nakagawa, Y. Ohkubo, H. Nitani, T. Akita, Y. Mizukoshi and T. A. Yamamoto
Chemical Engineering Journal, 223 (2013) 347-355.
DOI:10.1016/j.cej.2013.02.116
Mechanical properties and microstructures of β Ti-25Nb-11Sn ternary alloy for biomedical applications
T.-K. Jung, S. Semboshi, N. Masahashi and S. Hanada
Materials Science and Engineering: C, 33(2013)1629-1635.
DOI: 10.1016/j.msec.2012.12.072
Fabrication of visible-light-responsive titanium dioxide layer on titanium using anodic oxidization in nitric acid
N. Ohtsu, H. Kanno, S. Komiya, Y. Mizukoshi and N. Masahashi
Applied Surface Science, 270 (2013) 513-518.
DOI: 10.1016/j.apsusc.2013.01.071
Effect of support for Pt-Cu bimetallic catalysts synthesized by electron beam irradiation method on preferential CO oxidation
J. Kugai, T. Moriya, S. Seino, T. Nakagawa, Y. Ohkubo, H. Nitani, Y. Mizukoshi and T. A. Yamamoto
Applied Catalysis B: Environmental, 126 (2012) 306– 314.
DOI:10.1016/j.apcatb.2012.07.028
A new concept of hip joint stem and its fabrication using metastable TiNbSn alloy
T.-K. Jung, H.-S. Lee, S. Semboshi, N. Masahashi, T. Abumiya and S. Hanada
Journal of Alloys and Compounds, 536(2012) S582-S585.
DOI: 10.1016/j.jallcom.2011.12.077
Angle resolved XPS studies on an anodic oxide formed on Ti-Nb-Sn alloy and the photo-induced change in carbon contaminants adsorbed on its surface
N. Ohtsu, N. Masahashi and Y. Mizukoshi
Applied Surface Science, 258 (2012) 6052– 6055.
DOI:10.1016/j.apsusc.2012.02.132
Photo-induced properties of anodic oxide films on Ti6Al4V
N. Masahashi, Y. Mizukoshi, S. Semboshi, K. Ohmura and S. Hanada
Thin Solid Films, 520 (2012) 4956-4964.
DOI:10.1016/j.tsf.2012.03.026
Visible Light Responsive TiO2 Photocatalyst Prepared by Anodization of Ti-6Al-4V Alloy
Y. Mizukoshi and N. Masahashi
Chemistry Letters, 41 (2012) 544-545.(Published on the web April 28, 2012)
DOI:10.1246/cl.2012.544
Visible light response of nitrogen and sulfur co-doped TiO2 photocatalysts fabricated by anodic oxidation
Y. Komai, K. Okitsu, R. Nishimura, N. Ohtsu, G. Miyamoto, T. Furuhara, S. Semboshi, Y. Mizukoshi and N. Masahashi
Catalysis Today (Innovations driven by catalysis - Selected papers from TOCAT6 / APCAT5), 164 (2011)399-403.
DOI : 10.1016/j.cattod.2010.10.085
Dielectric Properties of Anodic Oxide Film on Nb/Nb2N Two Phase Alloys
S. Semboshi, N. Ohtsu, Y. Mizukoshi and N. Masahashi
Thin Solid Films, 519 (2010) 719-724.
DOI : 10.1016/j.tsf.2010.08.131
Photo-induced Characteristics of a Ti-Nb-Sn Biometallic Alloy with Low Young's Modulus
N. Masahashi, Y. Mizukoshi, S. Semboshi, N. Ohtsu, T.K. Jung and S. Hanada
Thin Solid Films, 519 (2010) 276-283.
DOI : 10.1016/j.tsf.2010.07.114
Photocatalytic Activities and Crystal Structures of Titanium Dioxide by Anodization : Their Dependence upon Current Density
Y. Mizukoshi and N. Masahashi
Materials Transactions, 51 (2010) 1443-1448.
DOI : 10.2320/matertrans.M2010106
Mechanical Properties-Graded Ti Alloy Implants for Orthopedic Applications
T.-K. Jung, H. Matsumoto, T. Abumiya, N. Masahashi, M.-S. Kim and S. Hanada
Materials Science Forum 631-632, pp. 205-210.
DOI : 10.4028/www.scientific.net/MSF.631-632.205
Dependence of Photocatalytic Activities upon the Structures of Au/Pd Bimetallic Nanoparticles Immobilized on TiO2 Surface
Y. Mizukoshi, K. Sato, T. J. Konno and N. Masahashi
Applied Catalysis B Environmental, 94 (2010) 248–253.
DOI : 10.1016/j.apcatb.2009.11.015
Hydrocarbon decomposition on a hydrophilic TiO2 surface by UV irradiation: Spectral and quantitative analysis using in-situ XPS technique
N. Ohtsu, N. Masahashi,Y. Mizukoshi and K. Wagatsuma
Langmuir, 25 (2009) 11586–11591.
DOI : 10.1021/la901505m
Effects of ultrasound irradiation on preparation of titanium dioxide photocatalyst by anodic oxidation method
Y. Komai, Y. Mizukoshi, K. Okitsu, R. Nishimura and N. Masahashi
Matarials Transactions, 50 (2009) 2182-2186.
DOI : 10.2320/matertrans.MAW200912
Visible light responses of sulfur-doped rutile titanium dioxide photocatalysts fabricated by anodic oxidation
Y. Mizukoshi, N. Ohtsu, S. Semboshi and N. Masahashi
Applied Catalysis B Environmental, 91 (2009) 152–156.
DOI : 10.1016/j.apcatb.2009.05.018
Preparation of Hydrogen Permeable Membrane Using Nanoparticles Electrophoresis Technique
A. Tominaga, Y. Mizukoshi, O. Nakagoe and S. Tanabe
Topics in Catalysis, 52 (2009) 860-864.
DOI : 10.1007/s11244-009-9230-4
Enhanced photocatalytic activity of rutile TiO2 prepared by anodic oxidation in high concentration sulfuric acid electrolyte
N. Masahashi, Y. Mizukoshi, S. Semboshi and N. Ohtsu
Applied Catalysis B Environmental, 90 (2009), 255-261.
DOI : 10.1016/j.apcatb.2009.03.011
Preparation of biocompatible superparamagnetic magnetite nanoparticles by reverse precipitation method: Contribution of sonochemically generated oxidants
Y. Mizukoshi, T. Shuto, N. Masahashi and S. Tanabe
Ultrasonics Sonochemistry,16 (2009) 525-531.
DOI : 10.1016/j.ultsonch.2008.12.017
Superhydrophilicity of Rutile TiO2 Prepared by Anodic Oxidation in High Concentration Sulfuric Acid Electrolyte
N. Masahashi, Y. Mizukoshi, S. Semboshi and N. Ohtsu
Chemistry Letters, 37(2008)1126-1127.
DOI : 10.1246/cl.2008.1126
Magnetically Retrievable Palladium/Maghemite Nanocomposite Catalysts Prepared by Sonochemical Reduction Method
Y. Mizukoshi, K. Sato, T. J. Konno, N. Masahashi and S. Tanabe
Chemistry Letters, 37 (2008) 922-923.
DOI : 10.1246/cl.2008.922
Sonochemical immobilization of noble metal nanoparticles on the surface of maghemite : Mechanism and morphological control of the products
Y. Mizukoshi, Y. Tsuru, A. Tominaga, S. Seino, N. Masahashi, S. Tanabe and T. A. Yamamoto
Ultrasonics Sonochemistry, 15 (2008) 875-880.
DOI : 10.1016/j.ultsonch.2007.12.007
Microstructure and superhydrophilicity of anodic TiO2 films on pure titanium
N. Masahashi, S. Semboshi, N. Ohtsu and M. Oku
Thin Solid Films, 516 (2008) 7488-7496.
DOI : 10.1016/j.tsf.2008.03.047
Superhydrophilicity and XPS study of boron-doped TiO2
N. Masahashi and M. Oku
Applied Surface Science, 254 (2008) 7056-7060.
DOI : 10.1016/j.apsusc.2008.05.132
Sonochemical Synthesis of Gold Nanoparticles on Chitosan
K. Okitsu, Y. Mizukoshi, T. A. Yamamoto, Y. Maeda and Y. Nagata
Material Letters, 61 (2007) 3429-3431.
DOI: 10.1016/j.matlet.2006.11.090
Functionalization of magnetic gold/iron-oxide composite nanoparticles with oligonucleotides and magnetic separation of specific target
T. Kinoshita, S. Seino, Y. Mizukoshi, T. Nakagawa and T. A. Yamamoto
Journal of Magnetism and Magnetic Materials, 311 (2007) 255-258.
DOI: 10.1016/j.jmmm.2006.10.1161
Immobilization of Noble Metal Nanoparticles on the Surface of TiO2 by Sonochemical Method: Photocatalytic Production of Hydrogen from an Aqueous Solution of Ethanol
Y. Mizukoshi, Y. Makise, T. Shuto, J. Hu, A. Tominaga, S. Shironita and S. Tanabe
Ultrasonics Sonochemistry, 14(2007), 387-392.
DOI: 10.1016/j.ultsonch.2006.08.001
Microstructural observation of ordered beta-Ta2 H in hydrogenated tantalum
S. Semboshi, T. J. Konno, N. Masahashi and S. Hanada
Metallic Materials Transactions A-Physical Metallic Materials Science, 38A (2007) 956-963.
DOI: 10.1007/s11661-007-9134-5
Fabrication of bulk anatase TiO2 by the spark sintering method
N. Masahashi
Materials Science and Engineering A, 452–453 (2007) 721-726.
DOI: 10.1016/j.msea.2006.11.021
Fracture Behaviors of Niobium Alloys by Hydrogenation and its Application for Fine Powder Fabrication
S. Semboshi, N. Masahashi, T. J. Konno and S. Hanada
Materials Science Forum, 539-543 (2007) 2719-2724.
DOI: 10.4028/www.scientific.net/MSF.539-543.2719
Mechanical Properties of Porous Titanium Compacts
N. Nomura, Y. Baba, A. Kawamura, S.Fujinuma, A. Chiba, N. Masahashi and S. Hanada
Materials Science Forum, 539-543 (2007) 1033-1037.
DOI: 10.4028/www.scientific.net/MSF.539-543.1033
Fabrication and Corrosion Properties of Iron Aluminum Alloy/Steel Laminated Composite Prepared by Clad Rolling
N. Masahashi, M. Oku, S. Watanabe and S. Hanada
Materials Science Forum, 539-543 (2007) 866-871.
DOI: 10.4028/www.scientific.net/MSF.539-543.866
Corrosion Behavior of Pre-treated Fe–Al Alloys in Aqueous Acid
N. Masahashi, G. Kimura, M. Oku and S. Hanada
Solid State Phenomena,127 (2007) 233-238.
DOI: 10.4028/www.scientific.net/SSP.127.233